Heavy-Duty Riot Yoke 2.0
Two heights. Two widths. Built for life.
Why choose the Heavy-Duty Riot Yoke 2.0?
- Made for commercial use – tough, sturdy 3mm steel construction
- Available in 1.89m and 2.30m height – choose what fits your space or upgrade later
- Available in two widths: standard (135.4cm) or narrow (125cm)
- Interchangeable uprights – expand your setup without starting from scratch
- Disassembles quickly into easily portable parts
More than just a yoke
Invest in value without breaking the bank. The Riot Yoke 2.0 extends your gym into a broader, more dynamic training environment – you're buying more than just a yoke.
With a pair of J-hooks, it converts into a semi-stationary training station for squats, bench press and overhead work, dramatically increasing the number of exercises possible. With up to 600kg load capacity, it is built to withstand demanding, high-performance training.
Choosing your width: The standard crossbeam (135.4cm) is ideal for yoke walks and strongman training. The narrow version (125cm) is better suited for rack-style training and immediate compatibility with standard barbells.
Please note: When using the 1.89m version for yoke walks, ensure your barbell shaft is longer than 136cm. The narrow version fits standard barbells without issue.
Choosing your height: Start with the 1.89m version and upgrade to 2.30m at any time by simply adding a pair of uprights – no need to replace the entire unit.
Safety First, Always
Stability is non-negotiable. Four red safety pins, each secured with an additional rear bolt, ensure the crossbeam is locked firmly in place. UHMW guiding inserts inside the crossbeam frame provide a tight, non-wobbly fit, protecting both the uprights and the structure itself.
Small sled-type feet help protect your flooring during heavy carries and training. If needed, the yoke can be disassembled into manageable parts for transport – ideal for competitions or outdoor use.
The loading pins are individually removable and feature protective bases to prevent wear on both plates and frame.
Recommendation: Keep weight loaded on the pins during use to maximise base stability.
Compatible with cage & rack accessories
The Riot Yoke 2.0 is compatible with all 75mm box section attachments using 25mm pin holes, allowing you to expand your setup into a fully functional training station.
MRR attachments: Not directly compatible. However, they can be used with our Pin Adapters (MRR-compatible).
Specs
- 75mm × 75mm box section
- 25mm pin holes
- Finish: black powder coating
- Red safety pins with additional rear bolt
- Laser-cut numbering on every hole
- Removable loading pins
- UHMW guiding inserts
- Max. suggested load: 600kg
- Loading pin height: 28.5cm
- Loading pin diameter: 48mm (calibrated plates may not always fit)
- Crossbeam diameter: 8cm
Measurements
| 1.89m Standard | 1.89m Narrow | 2.30m Standard | 2.30m Narrow | |
| Height | 189.5cm | 189.5cm | 230cm | 230cm |
| Length | 125cm | 125cm | 125cm | 125cm |
| Width | 135.4cm | 125cm | 135.4cm | 125cm |
| Weight | ca 80kg | ca 78kg | ca 84kg | ca 82kg |
FAQ
Which width should I choose?
Choose standard (135.4cm) if your focus is yoke walks and strongman training. Choose narrow (125cm) if you mainly use it as a rack or need barbell compatibility immediately.
Can I upgrade from 1.89m to 2.30m later?
Yes. Simply add a pair of uprights – no need to buy a new yoke.
Are cage and rack accessories compatible?
Yes, all 75mm box section attachments with 25mm pin holes are compatible. MRR attachments can be used with Pin Adapters.
Can I move the yoke easily?
Yes. It disassembles into manageable parts, making it suitable for transport, competitions and outdoor training.
Original: $916.95
-65%$916.95
$320.93More Images
Heavy-Duty Riot Yoke 2.0
Two heights. Two widths. Built for life.
Why choose the Heavy-Duty Riot Yoke 2.0?
- Made for commercial use – tough, sturdy 3mm steel construction
- Available in 1.89m and 2.30m height – choose what fits your space or upgrade later
- Available in two widths: standard (135.4cm) or narrow (125cm)
- Interchangeable uprights – expand your setup without starting from scratch
- Disassembles quickly into easily portable parts
More than just a yoke
Invest in value without breaking the bank. The Riot Yoke 2.0 extends your gym into a broader, more dynamic training environment – you're buying more than just a yoke.
With a pair of J-hooks, it converts into a semi-stationary training station for squats, bench press and overhead work, dramatically increasing the number of exercises possible. With up to 600kg load capacity, it is built to withstand demanding, high-performance training.
Choosing your width: The standard crossbeam (135.4cm) is ideal for yoke walks and strongman training. The narrow version (125cm) is better suited for rack-style training and immediate compatibility with standard barbells.
Please note: When using the 1.89m version for yoke walks, ensure your barbell shaft is longer than 136cm. The narrow version fits standard barbells without issue.
Choosing your height: Start with the 1.89m version and upgrade to 2.30m at any time by simply adding a pair of uprights – no need to replace the entire unit.
Safety First, Always
Stability is non-negotiable. Four red safety pins, each secured with an additional rear bolt, ensure the crossbeam is locked firmly in place. UHMW guiding inserts inside the crossbeam frame provide a tight, non-wobbly fit, protecting both the uprights and the structure itself.
Small sled-type feet help protect your flooring during heavy carries and training. If needed, the yoke can be disassembled into manageable parts for transport – ideal for competitions or outdoor use.
The loading pins are individually removable and feature protective bases to prevent wear on both plates and frame.
Recommendation: Keep weight loaded on the pins during use to maximise base stability.
Compatible with cage & rack accessories
The Riot Yoke 2.0 is compatible with all 75mm box section attachments using 25mm pin holes, allowing you to expand your setup into a fully functional training station.
MRR attachments: Not directly compatible. However, they can be used with our Pin Adapters (MRR-compatible).
Specs
- 75mm × 75mm box section
- 25mm pin holes
- Finish: black powder coating
- Red safety pins with additional rear bolt
- Laser-cut numbering on every hole
- Removable loading pins
- UHMW guiding inserts
- Max. suggested load: 600kg
- Loading pin height: 28.5cm
- Loading pin diameter: 48mm (calibrated plates may not always fit)
- Crossbeam diameter: 8cm
Measurements
| 1.89m Standard | 1.89m Narrow | 2.30m Standard | 2.30m Narrow | |
| Height | 189.5cm | 189.5cm | 230cm | 230cm |
| Length | 125cm | 125cm | 125cm | 125cm |
| Width | 135.4cm | 125cm | 135.4cm | 125cm |
| Weight | ca 80kg | ca 78kg | ca 84kg | ca 82kg |
FAQ
Which width should I choose?
Choose standard (135.4cm) if your focus is yoke walks and strongman training. Choose narrow (125cm) if you mainly use it as a rack or need barbell compatibility immediately.
Can I upgrade from 1.89m to 2.30m later?
Yes. Simply add a pair of uprights – no need to buy a new yoke.
Are cage and rack accessories compatible?
Yes, all 75mm box section attachments with 25mm pin holes are compatible. MRR attachments can be used with Pin Adapters.
Can I move the yoke easily?
Yes. It disassembles into manageable parts, making it suitable for transport, competitions and outdoor training.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Two heights. Two widths. Built for life.
Why choose the Heavy-Duty Riot Yoke 2.0?
- Made for commercial use – tough, sturdy 3mm steel construction
- Available in 1.89m and 2.30m height – choose what fits your space or upgrade later
- Available in two widths: standard (135.4cm) or narrow (125cm)
- Interchangeable uprights – expand your setup without starting from scratch
- Disassembles quickly into easily portable parts
More than just a yoke
Invest in value without breaking the bank. The Riot Yoke 2.0 extends your gym into a broader, more dynamic training environment – you're buying more than just a yoke.
With a pair of J-hooks, it converts into a semi-stationary training station for squats, bench press and overhead work, dramatically increasing the number of exercises possible. With up to 600kg load capacity, it is built to withstand demanding, high-performance training.
Choosing your width: The standard crossbeam (135.4cm) is ideal for yoke walks and strongman training. The narrow version (125cm) is better suited for rack-style training and immediate compatibility with standard barbells.
Please note: When using the 1.89m version for yoke walks, ensure your barbell shaft is longer than 136cm. The narrow version fits standard barbells without issue.
Choosing your height: Start with the 1.89m version and upgrade to 2.30m at any time by simply adding a pair of uprights – no need to replace the entire unit.
Safety First, Always
Stability is non-negotiable. Four red safety pins, each secured with an additional rear bolt, ensure the crossbeam is locked firmly in place. UHMW guiding inserts inside the crossbeam frame provide a tight, non-wobbly fit, protecting both the uprights and the structure itself.
Small sled-type feet help protect your flooring during heavy carries and training. If needed, the yoke can be disassembled into manageable parts for transport – ideal for competitions or outdoor use.
The loading pins are individually removable and feature protective bases to prevent wear on both plates and frame.
Recommendation: Keep weight loaded on the pins during use to maximise base stability.
Compatible with cage & rack accessories
The Riot Yoke 2.0 is compatible with all 75mm box section attachments using 25mm pin holes, allowing you to expand your setup into a fully functional training station.
MRR attachments: Not directly compatible. However, they can be used with our Pin Adapters (MRR-compatible).
Specs
- 75mm × 75mm box section
- 25mm pin holes
- Finish: black powder coating
- Red safety pins with additional rear bolt
- Laser-cut numbering on every hole
- Removable loading pins
- UHMW guiding inserts
- Max. suggested load: 600kg
- Loading pin height: 28.5cm
- Loading pin diameter: 48mm (calibrated plates may not always fit)
- Crossbeam diameter: 8cm
Measurements
| 1.89m Standard | 1.89m Narrow | 2.30m Standard | 2.30m Narrow | |
| Height | 189.5cm | 189.5cm | 230cm | 230cm |
| Length | 125cm | 125cm | 125cm | 125cm |
| Width | 135.4cm | 125cm | 135.4cm | 125cm |
| Weight | ca 80kg | ca 78kg | ca 84kg | ca 82kg |
FAQ
Which width should I choose?
Choose standard (135.4cm) if your focus is yoke walks and strongman training. Choose narrow (125cm) if you mainly use it as a rack or need barbell compatibility immediately.
Can I upgrade from 1.89m to 2.30m later?
Yes. Simply add a pair of uprights – no need to buy a new yoke.
Are cage and rack accessories compatible?
Yes, all 75mm box section attachments with 25mm pin holes are compatible. MRR attachments can be used with Pin Adapters.
Can I move the yoke easily?
Yes. It disassembles into manageable parts, making it suitable for transport, competitions and outdoor training.
